Determining Security: disk

Showing posts with label disk. Show all posts

Tuesday, March 27, 2012

Determine SPID is using TempDB disk space

I have an application that processes approximately 300 transactions/sec on a
SQL Server 2000 database.
Periodically I have a process that uses a large amount of TempDB database
used disk space.
I have an alert set if the TempDB database used disk space reaches 80% then
send an alert.
Please help me with a script that I can use after the alert is set off to
determine which process is using the most TempDB database used disk space.
Thank You,You can run sp_who2 on tempdb, and see which [SPID] has been consuming
massive unusually high amounts of [DiskIO]. Also, is you know the object_id
that is consuming the disk space, then sp_lock will reveal who is currently
holding it.
"Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
news:B9B5531E-B69F-4406-8951-8A3C3B009819@.microsoft.com...
> I have an application that processes approximately 300 transactions/sec on
> a
> SQL Server 2000 database.
> Periodically I have a process that uses a large amount of TempDB database
> used disk space.
> I have an alert set if the TempDB database used disk space reaches 80%
> then
> send an alert.
> Please help me with a script that I can use after the alert is set off to
> determine which process is using the most TempDB database used disk space.
> Thank You,
>
>
>

Sunday, March 25, 2012

Determine first log backup after db backup

To create order in backkup log files i'm using FistLSN and LastLSN collumns
of RESTORE HEADERONLY procedure. But i dont know how to connect them to
database backup.
Any ideas ?
Best Regards
Wojciech Znaniecki
Try checking table backupset in database msdb. Something like:
select
backup_set_id,
type,
backup_start_date,
backup_finish_date
from
msdb..backupset
where
database_name = 'your_db'
and type = 'L'
and backup_start_date > (select top 1 backup_finish_date from
msdb..backupset where database_name = 'your_db' and type = 'D' order by
backup_start_date desc)
order by
backup_start_date;
AMB
"Wojtek Z" wrote:

> Hello,
> How can I check if backup log fiile is first log backup after database
> backup ?
> f.e. I have 1 database backup file ( BACKUP DATABASE x TO DISK = ...)
> and 10 log backup files ( BACKUP LOG x TO DISK='...)
> I want to be sure that noone have removed the fist log file. using T-SQL

> To create order in backkup log files i'm using FistLSN and LastLSN collumns
> of RESTORE HEADERONLY procedure. But i dont know how to connect them to
> database backup.
> Any ideas ?
> --
> Best Regards
> Wojciech Znaniecki
>
>
|||Thanks - i havent known that. But how about restoring db to a different
server ?
Best Regards,
Wojciech Znaniecki
Uytkownik "Alejandro Mesa" <AlejandroMesa@.discussions.microsoft.com>
napisa w wiadomoci
news:9DBEE13B-A899-4BF5-8E29-DA24F801F335@.microsoft.com...[vbcol=seagreen]
> Try checking table backupset in database msdb. Something like:
> select
> backup_set_id,
> type,
> backup_start_date,
> backup_finish_date
> from
> msdb..backupset
> where
> database_name = 'your_db'
> and type = 'L'
> and backup_start_date > (select top 1 backup_finish_date from
> msdb..backupset where database_name = 'your_db' and type = 'D' order by
> backup_start_date desc)
> order by
> backup_start_date;
>
> AMB
> "Wojtek Z" wrote:

[vbcol=seagreen]
collumns[vbcol=seagreen]
|||My guess is that the first log backup's FirstLsn need to be prior to the database backup's FirstLsn.
Tibor Karaszi, SQL Server MVP
http://www.karaszi.com/sqlserver/default.asp
http://www.solidqualitylearning.com/
"Wojtek Z" <wojtas_z@.poczta.fm> wrote in message news:d5upv9$174$1@.nemesis.news.tpi.pl...
> Thanks - i havent known that. But how about restoring db to a different
> server ?
> --
> Best Regards,
> Wojciech Znaniecki
> Uytkownik "Alejandro Mesa" <AlejandroMesa@.discussions.microsoft.com>
> napisa w wiadomoci
> news:9DBEE13B-A899-4BF5-8E29-DA24F801F335@.microsoft.com...
>

> collumns
>
|||Uytkownik "Tibor Karaszi"
<tibor_please.no.email_karaszi@.hotmail.nomail.com> napisa w wiadomoci
news:OcqdnSvVFHA.3320@.TK2MSFTNGP12.phx.gbl...
> My guess is that the first log backup's FirstLsn need to be prior to the
database backup's FirstLsn.
Thanks ! thats it.
Best Regards,
Wojciech Znaniecki

Determine first log backup after db backup

Hello,
How can I check if backup log fiile is first log backup after database
backup ?
f.e. I have 1 database backup file ( BACKUP DATABASE x TO DISK = ...)
and 10 log backup files ( BACKUP LOG x TO DISK='...)
I want to be sure that noone have removed the fist log file. using T-SQL :)
To create order in backkup log files i'm using FistLSN and LastLSN collumns
of RESTORE HEADERONLY procedure. But i dont know how to connect them to
database backup.
Any ideas ?
--
Best Regards
Wojciech ZnanieckiTry checking table backupset in database msdb. Something like:
select
backup_set_id,
type,
backup_start_date,
backup_finish_date
from
msdb..backupset
where
database_name = 'your_db'
and type = 'L'
and backup_start_date > (select top 1 backup_finish_date from
msdb..backupset where database_name = 'your_db' and type = 'D' order by
backup_start_date desc)
order by
backup_start_date;
AMB
"Wojtek Z" wrote:
> Hello,
> How can I check if backup log fiile is first log backup after database
> backup ?
> f.e. I have 1 database backup file ( BACKUP DATABASE x TO DISK = ...)
> and 10 log backup files ( BACKUP LOG x TO DISK='...)
> I want to be sure that noone have removed the fist log file. using T-SQL :)
> To create order in backkup log files i'm using FistLSN and LastLSN collumns
> of RESTORE HEADERONLY procedure. But i dont know how to connect them to
> database backup.
> Any ideas ?
> --
> Best Regards
> Wojciech Znaniecki
>
>|||Thanks - i havent known that. But how about restoring db to a different
server ?
--
Best Regards,
Wojciech Znaniecki
U¿ytkownik "Alejandro Mesa" <AlejandroMesa@.discussions.microsoft.com>
napisa³ w wiadomo¶ci
news:9DBEE13B-A899-4BF5-8E29-DA24F801F335@.microsoft.com...
> Try checking table backupset in database msdb. Something like:
> select
> backup_set_id,
> type,
> backup_start_date,
> backup_finish_date
> from
> msdb..backupset
> where
> database_name = 'your_db'
> and type = 'L'
> and backup_start_date > (select top 1 backup_finish_date from
> msdb..backupset where database_name = 'your_db' and type = 'D' order by
> backup_start_date desc)
> order by
> backup_start_date;
>
> AMB
> "Wojtek Z" wrote:
> > Hello,
> > How can I check if backup log fiile is first log backup after database
> > backup ?
> > f.e. I have 1 database backup file ( BACKUP DATABASE x TO DISK = ...)
> > and 10 log backup files ( BACKUP LOG x TO DISK='...)
> > I want to be sure that noone have removed the fist log file. using T-SQL
:)
> >
> > To create order in backkup log files i'm using FistLSN and LastLSN
collumns
> > of RESTORE HEADERONLY procedure. But i dont know how to connect them to
> > database backup.
> > Any ideas ?
> >
> > --
> > Best Regards
> > Wojciech Znaniecki
> >
> >
> >|||My guess is that the first log backup's FirstLsn need to be prior to the database backup's FirstLsn.
--
Tibor Karaszi, SQL Server MVP
http://www.karaszi.com/sqlserver/default.asp
http://www.solidqualitylearning.com/
"Wojtek Z" <wojtas_z@.poczta.fm> wrote in message news:d5upv9$174$1@.nemesis.news.tpi.pl...
> Thanks - i havent known that. But how about restoring db to a different
> server ?
> --
> Best Regards,
> Wojciech Znaniecki
> U¿ytkownik "Alejandro Mesa" <AlejandroMesa@.discussions.microsoft.com>
> napisa³ w wiadomo¶ci
> news:9DBEE13B-A899-4BF5-8E29-DA24F801F335@.microsoft.com...
>> Try checking table backupset in database msdb. Something like:
>> select
>> backup_set_id,
>> type,
>> backup_start_date,
>> backup_finish_date
>> from
>> msdb..backupset
>> where
>> database_name = 'your_db'
>> and type = 'L'
>> and backup_start_date > (select top 1 backup_finish_date from
>> msdb..backupset where database_name = 'your_db' and type = 'D' order by
>> backup_start_date desc)
>> order by
>> backup_start_date;
>>
>> AMB
>> "Wojtek Z" wrote:
>> > Hello,
>> > How can I check if backup log fiile is first log backup after database
>> > backup ?
>> > f.e. I have 1 database backup file ( BACKUP DATABASE x TO DISK = ...)
>> > and 10 log backup files ( BACKUP LOG x TO DISK='...)
>> > I want to be sure that noone have removed the fist log file. using T-SQL
> :)
>> >
>> > To create order in backkup log files i'm using FistLSN and LastLSN
> collumns
>> > of RESTORE HEADERONLY procedure. But i dont know how to connect them to
>> > database backup.
>> > Any ideas ?
>> >
>> > --
>> > Best Regards
>> > Wojciech Znaniecki
>> >
>> >
>> >
>|||U¿ytkownik "Tibor Karaszi"
<tibor_please.no.email_karaszi@.hotmail.nomail.com> napisa³ w wiadomo¶ci
news:OcqdnSvVFHA.3320@.TK2MSFTNGP12.phx.gbl...
> My guess is that the first log backup's FirstLsn need to be prior to the
database backup's FirstLsn.
Thanks ! thats it.
--
Best Regards,
Wojciech Znaniecki

Determine first log backup after db backup

To create order in backkup log files i'm using FistLSN and LastLSN collumns
of RESTORE HEADERONLY procedure. But i dont know how to connect them to
database backup.
Any ideas ?
Best Regards
Wojciech ZnanieckiTry checking table backupset in database msdb. Something like:
select
backup_set_id,
type,
backup_start_date,
backup_finish_date
from
msdb..backupset
where
database_name = 'your_db'
and type = 'L'
and backup_start_date > (select top 1 backup_finish_date from
msdb..backupset where database_name = 'your_db' and type = 'D' order by
backup_start_date desc)
order by
backup_start_date;
AMB
"Wojtek Z" wrote:

> Hello,
> How can I check if backup log fiile is first log backup after database
> backup ?
> f.e. I have 1 database backup file ( BACKUP DATABASE x TO DISK = ...)
> and 10 log backup files ( BACKUP LOG x TO DISK='...)
> I want to be sure that noone have removed the fist log file. using T-SQL

> To create order in backkup log files i'm using FistLSN and LastLSN collumn
s
> of RESTORE HEADERONLY procedure. But i dont know how to connect them to
> database backup.
> Any ideas ?
> --
> Best Regards
> Wojciech Znaniecki
>
>|||Thanks - i havent known that. But how about restoring db to a different
server ?
Best Regards,
Wojciech Znaniecki
Uytkownik "Alejandro Mesa" <AlejandroMesa@.discussions.microsoft.com>
napisa w wiadomoci
news:9DBEE13B-A899-4BF5-8E29-DA24F801F335@.microsoft.com...[vbcol=seagreen]
> Try checking table backupset in database msdb. Something like:
> select
> backup_set_id,
> type,
> backup_start_date,
> backup_finish_date
> from
> msdb..backupset
> where
> database_name = 'your_db'
> and type = 'L'
> and backup_start_date > (select top 1 backup_finish_date from
> msdb..backupset where database_name = 'your_db' and type = 'D' order by
> backup_start_date desc)
> order by
> backup_start_date;
>
> AMB
> "Wojtek Z" wrote:
>

[vbcol=seagreen]
collumns[vbcol=seagreen]|||My guess is that the first log backup's FirstLsn need to be prior to the dat
abase backup's FirstLsn.
Tibor Karaszi, SQL Server MVP
http://www.karaszi.com/sqlserver/default.asp
http://www.solidqualitylearning.com/
"Wojtek Z" <wojtas_z@.poczta.fm> wrote in message news:d5upv9$174$1@.nemesis.news.tpi.pl...[vb
col=seagreen]
> Thanks - i havent known that. But how about restoring db to a different
> server ?
> --
> Best Regards,
> Wojciech Znaniecki
> Uytkownik "Alejandro Mesa" <AlejandroMesa@.discussions.microsoft.com>
> napisa w wiadomoci
> news:9DBEE13B-A899-4BF5-8E29-DA24F801F335@.microsoft.com...
>

> collumns
>[/vbcol]|||Uytkownik "Tibor Karaszi"
<tibor_please.no.email_karaszi@.hotmail.nomail.com> napisa w wiadomoci
news:OcqdnSvVFHA.3320@.TK2MSFTNGP12.phx.gbl...
> My guess is that the first log backup's FirstLsn need to be prior to the
database backup's FirstLsn.
Thanks ! thats it.
Best Regards,
Wojciech Znaniecki

Determine Disk Block Size ?

I have a SQL Server 2000 Enterprise database that processes 300
transactions/sec, approximately 300 users, and 250 GB in size. How can I
determine the the appropriate disk block size that should be on my system.
Thanks,Unless you have an overriding reason, go with the hardware manufacturer's
recommendations. These are typically the default settings. Changing the
NTFS block size usually has no measurable effect on system performance.
--
Geoff N. Hiten
Microsoft SQL Server MVP
Senior Database Administrator
Careerbuilder.com
I support the Professional Association for SQL Server
www.sqlpass.org
"Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
> I have a SQL Server 2000 Enterprise database that processes 300
> transactions/sec, approximately 300 users, and 250 GB in size. How can I
> determine the the appropriate disk block size that should be on my system.
> Thanks,
>|||Hi
Rather make sure that your drives are configured correctly.
Make sure your logs on RAID-10, and preferably your data on a separate
RAID-10 volume. RAID-5 hurts more than it helps.
As Geoff said, block size is not important, but getting maximum IO
throughput is.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
> Unless you have an overriding reason, go with the hardware manufacturer's
> recommendations. These are typically the default settings. Changing the
> NTFS block size usually has no measurable effect on system performance.
> --
> Geoff N. Hiten
> Microsoft SQL Server MVP
> Senior Database Administrator
> Careerbuilder.com
> I support the Professional Association for SQL Server
> www.sqlpass.org
> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
> >
> > I have a SQL Server 2000 Enterprise database that processes 300
> > transactions/sec, approximately 300 users, and 250 GB in size. How can
I
> > determine the the appropriate disk block size that should be on my
system.
> >
> > Thanks,
> >
> >
>|||Hi
Rather make sure that your drives are configured correctly.
Make sure your logs on RAID-10, and preferably your data on a separate
RAID-10 volume. RAID-5 hurts more than it helps.
As Geoff said, block size is not important, but getting maximum IO
throughput is.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
> Unless you have an overriding reason, go with the hardware manufacturer's
> recommendations. These are typically the default settings. Changing the
> NTFS block size usually has no measurable effect on system performance.
> --
> Geoff N. Hiten
> Microsoft SQL Server MVP
> Senior Database Administrator
> Careerbuilder.com
> I support the Professional Association for SQL Server
> www.sqlpass.org
> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
> >
> > I have a SQL Server 2000 Enterprise database that processes 300
> > transactions/sec, approximately 300 users, and 250 GB in size. How can
I
> > determine the the appropriate disk block size that should be on my
system.
> >
> > Thanks,
> >
> >
>|||Not that I disagree with the RAID-10 argument, I don't; however, I do
disagree with your comments about NTFS Cluster Sizes (a.k.a., block size).
The MS SQL Server Operations Manual makes a recommendation of using 64-KB
cluster sizes. We have done so with a dramatic total disk I/O throughput.
It makes sense. SQL Server reads and writes data in 8KB data pages, but
issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
simultaneously. If your block sizes are on these 8KB boundaries, SQL Server
Disk I/O requests can be more efficient.
Your biggest disk throughput bottleneck is total number of I/O Operations a
single spindle can handle. You're throughput will be based on type of
access, sequential versus random, and the size of each request. Optimizing
the request sizes coupled with a fixed maximum number of I/O Ops, should
make your system as efficient as possible.
Nevertheless, and along the same lines as the RAID arguments already
presented, this is also suggested from the Operations Manual: more smaller
disks are more efficient than fewer larger disks. This would come into play
in the 0 part of the RAID-10 argument. Striping allows more physical
spindles to fulfill requests, each one capable of servicing a theoretical
maximum number of I/O Ops. Furthermore, more files per Filegroup will spawn
additional disk threads per request. This coupled with number of disks can
greatly improve throughput.
Sincerely,
Anthony Thomas
"Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
Hi
Rather make sure that your drives are configured correctly.
Make sure your logs on RAID-10, and preferably your data on a separate
RAID-10 volume. RAID-5 hurts more than it helps.
As Geoff said, block size is not important, but getting maximum IO
throughput is.
Regards
--
Mike Epprecht, Microsoft SQL Server MVP
Zurich, Switzerland
IM: mike@.epprecht.net
MVP Program: http://www.microsoft.com/mvp
Blog: http://www.msmvps.com/epprecht/
"Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
> Unless you have an overriding reason, go with the hardware manufacturer's
> recommendations. These are typically the default settings. Changing the
> NTFS block size usually has no measurable effect on system performance.
> --
> Geoff N. Hiten
> Microsoft SQL Server MVP
> Senior Database Administrator
> Careerbuilder.com
> I support the Professional Association for SQL Server
> www.sqlpass.org
> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
> >
> > I have a SQL Server 2000 Enterprise database that processes 300
> > transactions/sec, approximately 300 users, and 250 GB in size. How can
I
> > determine the the appropriate disk block size that should be on my
system.
> >
> > Thanks,
> >
> >
>|||An I agree with your comments except for the last one:
Furthermore, more files per Filegroup will spawn
additional disk threads per request.
<<
That was true with 7.0 but is not necessarily true with SQL2000. In 2000
Sql Server can spawn multiple threads to read a single file as well. So
just having multiple files does not mean it will be more effecient or spawn
more threads than a single file.
Andrew J. Kelly SQL MVP
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:ep16rw1BFHA.3592@.TK2MSFTNGP09.phx.gbl...
> Not that I disagree with the RAID-10 argument, I don't; however, I do
> disagree with your comments about NTFS Cluster Sizes (a.k.a., block size).
> The MS SQL Server Operations Manual makes a recommendation of using 64-KB
> cluster sizes. We have done so with a dramatic total disk I/O throughput.
> It makes sense. SQL Server reads and writes data in 8KB data pages, but
> issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
> simultaneously. If your block sizes are on these 8KB boundaries, SQL
> Server
> Disk I/O requests can be more efficient.
> Your biggest disk throughput bottleneck is total number of I/O Operations
> a
> single spindle can handle. You're throughput will be based on type of
> access, sequential versus random, and the size of each request.
> Optimizing
> the request sizes coupled with a fixed maximum number of I/O Ops, should
> make your system as efficient as possible.
> Nevertheless, and along the same lines as the RAID arguments already
> presented, this is also suggested from the Operations Manual: more smaller
> disks are more efficient than fewer larger disks. This would come into
> play
> in the 0 part of the RAID-10 argument. Striping allows more physical
> spindles to fulfill requests, each one capable of servicing a theoretical
> maximum number of I/O Ops. Furthermore, more files per Filegroup will
> spawn
> additional disk threads per request. This coupled with number of disks
> can
> greatly improve throughput.
> Sincerely,
>
> Anthony Thomas
>
> --
> "Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
> news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
> Hi
> Rather make sure that your drives are configured correctly.
> Make sure your logs on RAID-10, and preferably your data on a separate
> RAID-10 volume. RAID-5 hurts more than it helps.
> As Geoff said, block size is not important, but getting maximum IO
> throughput is.
> Regards
> --
> Mike Epprecht, Microsoft SQL Server MVP
> Zurich, Switzerland
> IM: mike@.epprecht.net
> MVP Program: http://www.microsoft.com/mvp
> Blog: http://www.msmvps.com/epprecht/
> "Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
> news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
>> Unless you have an overriding reason, go with the hardware manufacturer's
>> recommendations. These are typically the default settings. Changing the
>> NTFS block size usually has no measurable effect on system performance.
>> --
>> Geoff N. Hiten
>> Microsoft SQL Server MVP
>> Senior Database Administrator
>> Careerbuilder.com
>> I support the Professional Association for SQL Server
>> www.sqlpass.org
>> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
>> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
>> >
>> > I have a SQL Server 2000 Enterprise database that processes 300
>> > transactions/sec, approximately 300 users, and 250 GB in size. How can
> I
>> > determine the the appropriate disk block size that should be on my
> system.
>> >
>> > Thanks,
>> >
>> >
>>
>|||I just read that SS2K SE spawns Read Ahead requests in 4xExtents, 128 KB
chunks, and spawns a thread per data file in each Filegroup. It also
mentioned that EE can exceed the number of concurrent extents per request
and managed the thread spawning more efficiently. But, damn if I can't
remember where I came across the information.
Anthony Thomas
"Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
news:uNjLEV5BFHA.2180@.TK2MSFTNGP10.phx.gbl...
An I agree with your comments except for the last one:
Furthermore, more files per Filegroup will spawn
additional disk threads per request.
<<
That was true with 7.0 but is not necessarily true with SQL2000. In 2000
Sql Server can spawn multiple threads to read a single file as well. So
just having multiple files does not mean it will be more effecient or spawn
more threads than a single file.
Andrew J. Kelly SQL MVP
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:ep16rw1BFHA.3592@.TK2MSFTNGP09.phx.gbl...
> Not that I disagree with the RAID-10 argument, I don't; however, I do
> disagree with your comments about NTFS Cluster Sizes (a.k.a., block size).
> The MS SQL Server Operations Manual makes a recommendation of using 64-KB
> cluster sizes. We have done so with a dramatic total disk I/O throughput.
> It makes sense. SQL Server reads and writes data in 8KB data pages, but
> issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
> simultaneously. If your block sizes are on these 8KB boundaries, SQL
> Server
> Disk I/O requests can be more efficient.
> Your biggest disk throughput bottleneck is total number of I/O Operations
> a
> single spindle can handle. You're throughput will be based on type of
> access, sequential versus random, and the size of each request.
> Optimizing
> the request sizes coupled with a fixed maximum number of I/O Ops, should
> make your system as efficient as possible.
> Nevertheless, and along the same lines as the RAID arguments already
> presented, this is also suggested from the Operations Manual: more smaller
> disks are more efficient than fewer larger disks. This would come into
> play
> in the 0 part of the RAID-10 argument. Striping allows more physical
> spindles to fulfill requests, each one capable of servicing a theoretical
> maximum number of I/O Ops. Furthermore, more files per Filegroup will
> spawn
> additional disk threads per request. This coupled with number of disks
> can
> greatly improve throughput.
> Sincerely,
>
> Anthony Thomas
>
> --
> "Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
> news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
> Hi
> Rather make sure that your drives are configured correctly.
> Make sure your logs on RAID-10, and preferably your data on a separate
> RAID-10 volume. RAID-5 hurts more than it helps.
> As Geoff said, block size is not important, but getting maximum IO
> throughput is.
> Regards
> --
> Mike Epprecht, Microsoft SQL Server MVP
> Zurich, Switzerland
> IM: mike@.epprecht.net
> MVP Program: http://www.microsoft.com/mvp
> Blog: http://www.msmvps.com/epprecht/
> "Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
> news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
>> Unless you have an overriding reason, go with the hardware manufacturer's
>> recommendations. These are typically the default settings. Changing the
>> NTFS block size usually has no measurable effect on system performance.
>> --
>> Geoff N. Hiten
>> Microsoft SQL Server MVP
>> Senior Database Administrator
>> Careerbuilder.com
>> I support the Professional Association for SQL Server
>> www.sqlpass.org
>> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
>> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
>> >
>> > I have a SQL Server 2000 Enterprise database that processes 300
>> > transactions/sec, approximately 300 users, and 250 GB in size. How can
> I
>> > determine the the appropriate disk block size that should be on my
> system.
>> >
>> > Thanks,
>> >
>> >
>>
>|||Not sure which document that came from either. The read ahead is actually
dynamic in the size of each read ahead request based somewhat on how
fragmented the data is. It can be 8K or 128K, it just depends on if it is
possible to do so or not. Most of the documentation for 2000 is wrong in
that it may state you need multiple files to spawn multiple threads. That
is definitely not the case and this is supposed to be fixed in the 2005
docs. Yes it can spawn a thread of each file but it is not limited to a
single thread per file. Even with a single file it is possible to spawn
multiple threads to read the same file. Here is what looks like a very
interesting article on IO in 2000. I haven't had a chance to read it yet
(hope to in the next few days) but it looks very promising.
http://www.microsoft.com/technet/prodtechnol/sql/2000/maintain/sqlIObasics.mspx
--
Andrew J. Kelly SQL MVP
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:u8xc256BFHA.1564@.TK2MSFTNGP09.phx.gbl...
>I just read that SS2K SE spawns Read Ahead requests in 4xExtents, 128 KB
> chunks, and spawns a thread per data file in each Filegroup. It also
> mentioned that EE can exceed the number of concurrent extents per request
> and managed the thread spawning more efficiently. But, damn if I can't
> remember where I came across the information.
> Anthony Thomas
>
> --
> "Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
> news:uNjLEV5BFHA.2180@.TK2MSFTNGP10.phx.gbl...
> An I agree with your comments except for the last one:
> Furthermore, more files per Filegroup will spawn
> additional disk threads per request.
> <<
> That was true with 7.0 but is not necessarily true with SQL2000. In 2000
> Sql Server can spawn multiple threads to read a single file as well. So
> just having multiple files does not mean it will be more effecient or
> spawn
> more threads than a single file.
>
> --
> Andrew J. Kelly SQL MVP
>
> "Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
> news:ep16rw1BFHA.3592@.TK2MSFTNGP09.phx.gbl...
>> Not that I disagree with the RAID-10 argument, I don't; however, I do
>> disagree with your comments about NTFS Cluster Sizes (a.k.a., block
>> size).
>> The MS SQL Server Operations Manual makes a recommendation of using 64-KB
>> cluster sizes. We have done so with a dramatic total disk I/O
>> throughput.
>> It makes sense. SQL Server reads and writes data in 8KB data pages, but
>> issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
>> simultaneously. If your block sizes are on these 8KB boundaries, SQL
>> Server
>> Disk I/O requests can be more efficient.
>> Your biggest disk throughput bottleneck is total number of I/O Operations
>> a
>> single spindle can handle. You're throughput will be based on type of
>> access, sequential versus random, and the size of each request.
>> Optimizing
>> the request sizes coupled with a fixed maximum number of I/O Ops, should
>> make your system as efficient as possible.
>> Nevertheless, and along the same lines as the RAID arguments already
>> presented, this is also suggested from the Operations Manual: more
>> smaller
>> disks are more efficient than fewer larger disks. This would come into
>> play
>> in the 0 part of the RAID-10 argument. Striping allows more physical
>> spindles to fulfill requests, each one capable of servicing a theoretical
>> maximum number of I/O Ops. Furthermore, more files per Filegroup will
>> spawn
>> additional disk threads per request. This coupled with number of disks
>> can
>> greatly improve throughput.
>> Sincerely,
>>
>> Anthony Thomas
>>
>> --
>> "Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
>> news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
>> Hi
>> Rather make sure that your drives are configured correctly.
>> Make sure your logs on RAID-10, and preferably your data on a separate
>> RAID-10 volume. RAID-5 hurts more than it helps.
>> As Geoff said, block size is not important, but getting maximum IO
>> throughput is.
>> Regards
>> --
>> Mike Epprecht, Microsoft SQL Server MVP
>> Zurich, Switzerland
>> IM: mike@.epprecht.net
>> MVP Program: http://www.microsoft.com/mvp
>> Blog: http://www.msmvps.com/epprecht/
>> "Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
>> news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
>> Unless you have an overriding reason, go with the hardware
>> manufacturer's
>> recommendations. These are typically the default settings. Changing
>> the
>> NTFS block size usually has no measurable effect on system performance.
>> --
>> Geoff N. Hiten
>> Microsoft SQL Server MVP
>> Senior Database Administrator
>> Careerbuilder.com
>> I support the Professional Association for SQL Server
>> www.sqlpass.org
>> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
>> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
>> >
>> > I have a SQL Server 2000 Enterprise database that processes 300
>> > transactions/sec, approximately 300 users, and 250 GB in size. How
>> > can
>> I
>> > determine the the appropriate disk block size that should be on my
>> system.
>> >
>> > Thanks,
>> >
>> >
>>
>>
>|||As always, thanks Andrew. Yes, I am well aware of having to "filter" read
information and make judgement calls on the sources reliability. The
article I read seemed respectable, though. If I come across it, I'll post a
"What's up" response.
Sincerely,
Anthony Thomas
"Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
news:ewn3Iz7BFHA.2260@.TK2MSFTNGP14.phx.gbl...
Not sure which document that came from either. The read ahead is actually
dynamic in the size of each read ahead request based somewhat on how
fragmented the data is. It can be 8K or 128K, it just depends on if it is
possible to do so or not. Most of the documentation for 2000 is wrong in
that it may state you need multiple files to spawn multiple threads. That
is definitely not the case and this is supposed to be fixed in the 2005
docs. Yes it can spawn a thread of each file but it is not limited to a
single thread per file. Even with a single file it is possible to spawn
multiple threads to read the same file. Here is what looks like a very
interesting article on IO in 2000. I haven't had a chance to read it yet
(hope to in the next few days) but it looks very promising.
http://www.microsoft.com/technet/prodtechnol/sql/2000/maintain/sqlIObasics.mspx
--
Andrew J. Kelly SQL MVP
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:u8xc256BFHA.1564@.TK2MSFTNGP09.phx.gbl...
>I just read that SS2K SE spawns Read Ahead requests in 4xExtents, 128 KB
> chunks, and spawns a thread per data file in each Filegroup. It also
> mentioned that EE can exceed the number of concurrent extents per request
> and managed the thread spawning more efficiently. But, damn if I can't
> remember where I came across the information.
> Anthony Thomas
>
> --
> "Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
> news:uNjLEV5BFHA.2180@.TK2MSFTNGP10.phx.gbl...
> An I agree with your comments except for the last one:
> Furthermore, more files per Filegroup will spawn
> additional disk threads per request.
> <<
> That was true with 7.0 but is not necessarily true with SQL2000. In 2000
> Sql Server can spawn multiple threads to read a single file as well. So
> just having multiple files does not mean it will be more effecient or
> spawn
> more threads than a single file.
>
> --
> Andrew J. Kelly SQL MVP
>
> "Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
> news:ep16rw1BFHA.3592@.TK2MSFTNGP09.phx.gbl...
>> Not that I disagree with the RAID-10 argument, I don't; however, I do
>> disagree with your comments about NTFS Cluster Sizes (a.k.a., block
>> size).
>> The MS SQL Server Operations Manual makes a recommendation of using 64-KB
>> cluster sizes. We have done so with a dramatic total disk I/O
>> throughput.
>> It makes sense. SQL Server reads and writes data in 8KB data pages, but
>> issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
>> simultaneously. If your block sizes are on these 8KB boundaries, SQL
>> Server
>> Disk I/O requests can be more efficient.
>> Your biggest disk throughput bottleneck is total number of I/O Operations
>> a
>> single spindle can handle. You're throughput will be based on type of
>> access, sequential versus random, and the size of each request.
>> Optimizing
>> the request sizes coupled with a fixed maximum number of I/O Ops, should
>> make your system as efficient as possible.
>> Nevertheless, and along the same lines as the RAID arguments already
>> presented, this is also suggested from the Operations Manual: more
>> smaller
>> disks are more efficient than fewer larger disks. This would come into
>> play
>> in the 0 part of the RAID-10 argument. Striping allows more physical
>> spindles to fulfill requests, each one capable of servicing a theoretical
>> maximum number of I/O Ops. Furthermore, more files per Filegroup will
>> spawn
>> additional disk threads per request. This coupled with number of disks
>> can
>> greatly improve throughput.
>> Sincerely,
>>
>> Anthony Thomas
>>
>> --
>> "Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
>> news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
>> Hi
>> Rather make sure that your drives are configured correctly.
>> Make sure your logs on RAID-10, and preferably your data on a separate
>> RAID-10 volume. RAID-5 hurts more than it helps.
>> As Geoff said, block size is not important, but getting maximum IO
>> throughput is.
>> Regards
>> --
>> Mike Epprecht, Microsoft SQL Server MVP
>> Zurich, Switzerland
>> IM: mike@.epprecht.net
>> MVP Program: http://www.microsoft.com/mvp
>> Blog: http://www.msmvps.com/epprecht/
>> "Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
>> news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
>> Unless you have an overriding reason, go with the hardware
>> manufacturer's
>> recommendations. These are typically the default settings. Changing
>> the
>> NTFS block size usually has no measurable effect on system performance.
>> --
>> Geoff N. Hiten
>> Microsoft SQL Server MVP
>> Senior Database Administrator
>> Careerbuilder.com
>> I support the Professional Association for SQL Server
>> www.sqlpass.org
>> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
>> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
>> >
>> > I have a SQL Server 2000 Enterprise database that processes 300
>> > transactions/sec, approximately 300 users, and 250 GB in size. How
>> > can
>> I
>> > determine the the appropriate disk block size that should be on my
>> system.
>> >
>> > Thanks,
>> >
>> >
>>
>>
>|||Well, that doc confirmed at least part of what I read previously:
"SQL Server limits a single read-ahead request depth to 128 pages on most
editions. However, Microsoft SQL Server Enterprise Edition raises the limit
to 1,024 pages."
Sincerely,
Anthony Thomas
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:OIoyclBCFHA.3588@.TK2MSFTNGP11.phx.gbl...
As always, thanks Andrew. Yes, I am well aware of having to "filter" read
information and make judgement calls on the sources reliability. The
article I read seemed respectable, though. If I come across it, I'll post a
"What's up" response.
Sincerely,
Anthony Thomas
"Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
news:ewn3Iz7BFHA.2260@.TK2MSFTNGP14.phx.gbl...
Not sure which document that came from either. The read ahead is actually
dynamic in the size of each read ahead request based somewhat on how
fragmented the data is. It can be 8K or 128K, it just depends on if it is
possible to do so or not. Most of the documentation for 2000 is wrong in
that it may state you need multiple files to spawn multiple threads. That
is definitely not the case and this is supposed to be fixed in the 2005
docs. Yes it can spawn a thread of each file but it is not limited to a
single thread per file. Even with a single file it is possible to spawn
multiple threads to read the same file. Here is what looks like a very
interesting article on IO in 2000. I haven't had a chance to read it yet
(hope to in the next few days) but it looks very promising.
http://www.microsoft.com/technet/prodtechnol/sql/2000/maintain/sqlIObasics.mspx
--
Andrew J. Kelly SQL MVP
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:u8xc256BFHA.1564@.TK2MSFTNGP09.phx.gbl...
>I just read that SS2K SE spawns Read Ahead requests in 4xExtents, 128 KB
> chunks, and spawns a thread per data file in each Filegroup. It also
> mentioned that EE can exceed the number of concurrent extents per request
> and managed the thread spawning more efficiently. But, damn if I can't
> remember where I came across the information.
> Anthony Thomas
>
> --
> "Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
> news:uNjLEV5BFHA.2180@.TK2MSFTNGP10.phx.gbl...
> An I agree with your comments except for the last one:
> Furthermore, more files per Filegroup will spawn
> additional disk threads per request.
> <<
> That was true with 7.0 but is not necessarily true with SQL2000. In 2000
> Sql Server can spawn multiple threads to read a single file as well. So
> just having multiple files does not mean it will be more effecient or
> spawn
> more threads than a single file.
>
> --
> Andrew J. Kelly SQL MVP
>
> "Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
> news:ep16rw1BFHA.3592@.TK2MSFTNGP09.phx.gbl...
>> Not that I disagree with the RAID-10 argument, I don't; however, I do
>> disagree with your comments about NTFS Cluster Sizes (a.k.a., block
>> size).
>> The MS SQL Server Operations Manual makes a recommendation of using 64-KB
>> cluster sizes. We have done so with a dramatic total disk I/O
>> throughput.
>> It makes sense. SQL Server reads and writes data in 8KB data pages, but
>> issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
>> simultaneously. If your block sizes are on these 8KB boundaries, SQL
>> Server
>> Disk I/O requests can be more efficient.
>> Your biggest disk throughput bottleneck is total number of I/O Operations
>> a
>> single spindle can handle. You're throughput will be based on type of
>> access, sequential versus random, and the size of each request.
>> Optimizing
>> the request sizes coupled with a fixed maximum number of I/O Ops, should
>> make your system as efficient as possible.
>> Nevertheless, and along the same lines as the RAID arguments already
>> presented, this is also suggested from the Operations Manual: more
>> smaller
>> disks are more efficient than fewer larger disks. This would come into
>> play
>> in the 0 part of the RAID-10 argument. Striping allows more physical
>> spindles to fulfill requests, each one capable of servicing a theoretical
>> maximum number of I/O Ops. Furthermore, more files per Filegroup will
>> spawn
>> additional disk threads per request. This coupled with number of disks
>> can
>> greatly improve throughput.
>> Sincerely,
>>
>> Anthony Thomas
>>
>> --
>> "Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
>> news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
>> Hi
>> Rather make sure that your drives are configured correctly.
>> Make sure your logs on RAID-10, and preferably your data on a separate
>> RAID-10 volume. RAID-5 hurts more than it helps.
>> As Geoff said, block size is not important, but getting maximum IO
>> throughput is.
>> Regards
>> --
>> Mike Epprecht, Microsoft SQL Server MVP
>> Zurich, Switzerland
>> IM: mike@.epprecht.net
>> MVP Program: http://www.microsoft.com/mvp
>> Blog: http://www.msmvps.com/epprecht/
>> "Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
>> news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
>> Unless you have an overriding reason, go with the hardware
>> manufacturer's
>> recommendations. These are typically the default settings. Changing
>> the
>> NTFS block size usually has no measurable effect on system performance.
>> --
>> Geoff N. Hiten
>> Microsoft SQL Server MVP
>> Senior Database Administrator
>> Careerbuilder.com
>> I support the Professional Association for SQL Server
>> www.sqlpass.org
>> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
>> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
>> >
>> > I have a SQL Server 2000 Enterprise database that processes 300
>> > transactions/sec, approximately 300 users, and 250 GB in size. How
>> > can
>> I
>> > determine the the appropriate disk block size that should be on my
>> system.
>> >
>> > Thanks,
>> >
>> >
>>
>>
>|||Yes but my point was don't take that as a fixed size. It limits the max to
that value but the read ahead can be 8K as well if the conditions do not
allow for all 128K or higher.
--
Andrew J. Kelly SQL MVP
"Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
news:uJBYOuBCFHA.2568@.TK2MSFTNGP10.phx.gbl...
> Well, that doc confirmed at least part of what I read previously:
> "SQL Server limits a single read-ahead request depth to 128 pages on most
> editions. However, Microsoft SQL Server Enterprise Edition raises the
> limit
> to 1,024 pages."
> Sincerely,
>
> Anthony Thomas
>
> --
> "Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
> news:OIoyclBCFHA.3588@.TK2MSFTNGP11.phx.gbl...
> As always, thanks Andrew. Yes, I am well aware of having to "filter" read
> information and make judgement calls on the sources reliability. The
> article I read seemed respectable, though. If I come across it, I'll post
> a
> "What's up" response.
> Sincerely,
>
> Anthony Thomas
>
> --
> "Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
> news:ewn3Iz7BFHA.2260@.TK2MSFTNGP14.phx.gbl...
> Not sure which document that came from either. The read ahead is actually
> dynamic in the size of each read ahead request based somewhat on how
> fragmented the data is. It can be 8K or 128K, it just depends on if it is
> possible to do so or not. Most of the documentation for 2000 is wrong in
> that it may state you need multiple files to spawn multiple threads. That
> is definitely not the case and this is supposed to be fixed in the 2005
> docs. Yes it can spawn a thread of each file but it is not limited to a
> single thread per file. Even with a single file it is possible to spawn
> multiple threads to read the same file. Here is what looks like a very
> interesting article on IO in 2000. I haven't had a chance to read it yet
> (hope to in the next few days) but it looks very promising.
> http://www.microsoft.com/technet/prodtechnol/sql/2000/maintain/sqlIObasics.mspx
> --
> Andrew J. Kelly SQL MVP
>
> "Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
> news:u8xc256BFHA.1564@.TK2MSFTNGP09.phx.gbl...
>>I just read that SS2K SE spawns Read Ahead requests in 4xExtents, 128 KB
>> chunks, and spawns a thread per data file in each Filegroup. It also
>> mentioned that EE can exceed the number of concurrent extents per request
>> and managed the thread spawning more efficiently. But, damn if I can't
>> remember where I came across the information.
>> Anthony Thomas
>>
>> --
>> "Andrew J. Kelly" <sqlmvpnooospam@.shadhawk.com> wrote in message
>> news:uNjLEV5BFHA.2180@.TK2MSFTNGP10.phx.gbl...
>> An I agree with your comments except for the last one:
>> Furthermore, more files per Filegroup will spawn
>> additional disk threads per request.
>> <<
>> That was true with 7.0 but is not necessarily true with SQL2000. In 2000
>> Sql Server can spawn multiple threads to read a single file as well. So
>> just having multiple files does not mean it will be more effecient or
>> spawn
>> more threads than a single file.
>>
>> --
>> Andrew J. Kelly SQL MVP
>>
>> "Anthony Thomas" <ALThomas@.kc.rr.com> wrote in message
>> news:ep16rw1BFHA.3592@.TK2MSFTNGP09.phx.gbl...
>> Not that I disagree with the RAID-10 argument, I don't; however, I do
>> disagree with your comments about NTFS Cluster Sizes (a.k.a., block
>> size).
>> The MS SQL Server Operations Manual makes a recommendation of using
>> 64-KB
>> cluster sizes. We have done so with a dramatic total disk I/O
>> throughput.
>> It makes sense. SQL Server reads and writes data in 8KB data pages, but
>> issues Scatter-Gather I/O requests in 4 or more Extents (8 x 8KB pages)
>> simultaneously. If your block sizes are on these 8KB boundaries, SQL
>> Server
>> Disk I/O requests can be more efficient.
>> Your biggest disk throughput bottleneck is total number of I/O
>> Operations
>> a
>> single spindle can handle. You're throughput will be based on type of
>> access, sequential versus random, and the size of each request.
>> Optimizing
>> the request sizes coupled with a fixed maximum number of I/O Ops, should
>> make your system as efficient as possible.
>> Nevertheless, and along the same lines as the RAID arguments already
>> presented, this is also suggested from the Operations Manual: more
>> smaller
>> disks are more efficient than fewer larger disks. This would come into
>> play
>> in the 0 part of the RAID-10 argument. Striping allows more physical
>> spindles to fulfill requests, each one capable of servicing a
>> theoretical
>> maximum number of I/O Ops. Furthermore, more files per Filegroup will
>> spawn
>> additional disk threads per request. This coupled with number of disks
>> can
>> greatly improve throughput.
>> Sincerely,
>>
>> Anthony Thomas
>>
>> --
>> "Mike Epprecht (SQL MVP)" <mike@.epprecht.net> wrote in message
>> news:uY2FhGsBFHA.3840@.tk2msftngp13.phx.gbl...
>> Hi
>> Rather make sure that your drives are configured correctly.
>> Make sure your logs on RAID-10, and preferably your data on a separate
>> RAID-10 volume. RAID-5 hurts more than it helps.
>> As Geoff said, block size is not important, but getting maximum IO
>> throughput is.
>> Regards
>> --
>> Mike Epprecht, Microsoft SQL Server MVP
>> Zurich, Switzerland
>> IM: mike@.epprecht.net
>> MVP Program: http://www.microsoft.com/mvp
>> Blog: http://www.msmvps.com/epprecht/
>> "Geoff N. Hiten" <SRDBA@.Careerbuilder.com> wrote in message
>> news:uhfJBgXBFHA.2180@.TK2MSFTNGP12.phx.gbl...
>> Unless you have an overriding reason, go with the hardware
>> manufacturer's
>> recommendations. These are typically the default settings. Changing
>> the
>> NTFS block size usually has no measurable effect on system performance.
>> --
>> Geoff N. Hiten
>> Microsoft SQL Server MVP
>> Senior Database Administrator
>> Careerbuilder.com
>> I support the Professional Association for SQL Server
>> www.sqlpass.org
>> "Joe K." <Joe K.@.discussions.microsoft.com> wrote in message
>> news:B77A9710-86AA-4319-B539-6F65D91E5ECA@.microsoft.com...
>> >
>> > I have a SQL Server 2000 Enterprise database that processes 300
>> > transactions/sec, approximately 300 users, and 250 GB in size. How
>> > can
>> I
>> > determine the the appropriate disk block size that should be on my
>> system.
>> >
>> > Thanks,
>> >
>> >
>>
>>
>>
>

Tuesday, March 27, 2012

Determine SPID is using TempDB disk space

Sunday, March 25, 2012

Determine first log backup after db backup

Determine first log backup after db backup

Determine first log backup after db backup

Determine Disk Block Size ?

Determine Disk Block Size ?

Determine Disk Block Size ?

Determining Security

Blog Archive

About Me